Track Wheels & Gears (4 & 2) (3884997-R6)
Genuine Maytronics part · Tracks & Wheels

Track Wheels & Gears (4 & 2)

Part number 3884997-R6 · UPC 810071221026 · 1-year warranty

$54.99 on Amazon

Maytronics list price $54.99

Buy on Amazon Ask about this part

We do not stock this part in our own store yet, so the link goes to the genuine listing on Amazon. It is also sold by Maytronics. As an Amazon Associate we earn from qualifying purchases.

  • Replacement Guide Wheels (4 pk) with 2 Pully Gears

Fits 11 robotsHow to replace itSpecs

Compatibility

Fits these Dolphin robots.

Confirmed by Maytronics' compatibility checker and each robot's spare-parts list.

Also listed by Maytronics for: Dolphin Sigma, Dolphin M400, Dolphin Wave 60, Dolphin Wave 80, Dolphin Nautilus CC Supreme, Dolphin W20, Dolphin 2X2 C6 Plus, 2X2, Dolphin 2X2, Pro X2, Dolphin Pro X2, Wave 100, Dolphin C6, Dolphin Maximus X70, Dolphin Zenit 20, Dolphin Active X4, Dolphin Comfort Active, Dolphin KAPTUR 400, PS50, Dolphin SOPRA PE RFECT, Dolphin TopStar gold, Dolphin Evolution 50, F50, Dolphin Maxi Kart, Dolphin SF50, Dolphin DIVER PRO 400, Dolphin EX60, Dolphin Blue Maxi 65, Dolphin DIVER PRO 500, Dolphin Evolution 60, F60, Dolphin F60, PS60, SF60, Dolphin SF60, Dolphin Swell MX, Dolphin C5 PRO, Dolphin Pro X1, Dolphin Maximus X90, Dolphin Active X5.

Do it yourself

How to replace it at home.

Maytronics' own step-by-step answers and videos for this kind of part.

How do I replace the side paddlewheel on my Skimmi?Video

Disassembly:

  1. Flip the robot onto the solar panel

  2. Remove the filter

  3. Rotate the side paddlewheel to locate the screw (Paddlewheel Screw M2.5 × 8 mm – DIN913 A2)

  4. Use a star screwdriver (1.2 mm) to remove the screw

  5. Carefully remove the paddlewheel

  6. Repeat on the other side if needed

Assembly:

  1. When installing the new paddlewheel, make sure the holes line up

  2. Before inserting the screws, dip them in Loctite 574 and tighten them with the star screwdriver.

  3. Repeat on the other side if needed

  4. Reinstall the filter tray

Open this answer on its own page →

How do I replace the tracks on my Dolphin robot?Video

Click your robot model from the following list to see the video and instructions.

M400/M500/Aquarius XL

Tracks

  1. Unplug the power supply from the outlet
  2. Lower the handle and flip the robot over onto its backside
  3. Using a screwdriver, remove the back brush from its sockets
  4. Gently remove the brush without removing the tracks from their place
  5. Using your hands, pull the front bush out of the sockets
  6. Unscrew and remove all four side panel screws, and remove the side panel
  7. Remove the rubber track
  8. Unscrew and remove all four side panel screws, and remove the side panel on the other side
  9. Remove the rubber track
  10. Reposition the new tracks and reposition the side panels with the four screws on the side. Repeat on the other side.
  11. Install the brushes in the designated sockets
  12. Flip the robot back to its original position and straighten the handle

S50 (S50, E10, E20, Active 10, Cayman, Escape, Encore)

S50: tracks
E10/E20/Active 10/Cayman/Escape/Encore: tracks

Unplug the power supply from the outlet.

  1. Turn the robot upside-down.
  2. Remove the tracks from the robot.
  3. Reinstall the new tracks on each side.
  4. Rotate the brush to ensure that the tracks are correctly installed.

S100 (Advantage, Proteus DX3, Saturn, Echo, Nautilus CC, Active 15, Cayman, Escape, Explorer E20)

S100: tracks

Gray tracks

  1. Unplug the power supply from the outlet.
  2. Turn the robot upside-down.
  3. Remove the tracks from the robot.
  4. Reinstall the new tracks on each side.
  5. Rotate the brush to ensure that the tracks are correctly installed.

S200 (E30, Advantage Ultra, Active 20, Quantum, T35, Triton PS)

S200: the tracks
Gray tracks

  1. Unplug the power supply from the outlet.
  2. Turn the robot upside-down.
  3. Remove the tracks from the robot.
  4. Reinstall the new tracks on each side.
  5. Rotate the brush to ensure that the tracks are correctly installed.

S300/S400 (Proteus DX5i, Active 30, T35/T45, Premium 40, Explorer E30, Active 30i, T55i, E50, Active 50, Explorer E50)

S300: the tracks

Gray tracks

  1. Unplug the power supply from the outlet.
  2. Turn the robot upside-down.
  3. Remove the tracks from the robot.
  4. Reinstall the new tracks on each side.
  5. Rotate the brush to ensure that the tracks are correctly installed.

M550/M600/M700 (Active 60, E60i, Explorer E70)

The tracks

  1. Unplug the power supply from the outlet.
  2. Turn the robot upside-down.
  3. Remove the tracks from the robot.
  4. Reinstall the new tracks on each side.
  5. Rotate the brush to ensure that the tracks are correctly installed.

Liberty 200/300/400

The tracks

  1. Unplug the power supply from the outlet.
  2. Turn the robot upside-down.
  3. Remove the tracks from the robot.
  4. Reinstall the new tracks on each side.
  5. Rotate the brush to ensure that the tracks are correctly installed.

Liberty 600


The tracks

Nautilus CC Plus

The tracks

Premier

The tracks

Sigma/Nautilus CC Supreme

The tracks

If you wish to purchase replacement tracks for your robot, please visit our Dolphin Spare Parts & Accessories page or check with your local Dolphin dealer if they sell replacement tracks.

Open this answer on its own page →

Specifications

General Info

Warranty (years)
1
UPC
810071221026
Tracks & Wheels

Related parts.

All tracks & wheelsAll parts for the Refurbished Nautilus CC Supreme
Need a hand?

Not sure this is the right part?

Talk to a Dolphin specialist Live chat about part 3884997-R6, a part number or a fix. Real people, no bots. Start a chat Find an authorized dealer 1,200+ Dolphin service dealers across the US for repairs, parts and warranty work. Find a dealer Warranty and repairs What the Maytronics warranty covers, how to register and how a repair claim works. Warranty details