Dolphin pool cleaner motor units & impellers.
Every genuine Maytronics motor unit and impeller for a Dolphin robot. The motor unit is the sealed block inside the robot that holds the pump motor and the drive motor; the impeller is the fan on top of it that pulls water through the filter. Pick your model to see the units Maytronics confirms for it.
Find the right motor unit for your Dolphin.
Motor units are the most model-specific part a Dolphin has: the drive type, the climbing ability, the LED and the filter indicator all live in it. Rule out the cheap causes first, then match the unit to the robot's exact model number.
Impellers (2)
The impeller and its screw, the fan that pulls water through the filter. The first part to check when suction drops.
Impeller Grill Black SNR50/F5-SP
Drive wheel assemblies (1)
The drive wheel assemblies that carry the robot on the tracks.
Wheel ASSY Cb Grey 11C L600
Motor units (16)
The sealed pump-and-drive motor units, by platform and cycle length. Sold on exchange where Maytronics marks the part EX.
Motor Unit, S2 with LED
Motor Unit, S1 Climb, Ex
Motor Unit, LED and Ffi S2
Motor UNIT,S2
Mu Diag Basic 3H Ex
Mu Diag Basic 8 Cl 2H Ex
Mu Dyn 2010 Comm 4/5 Ex
Mu Dyn 2010 Ex
No motor unit matches. Send us the model number from the label under the robot's handle and we will find the part.
Motor Units & Impellers by Dolphin model.
The robots we sell first, then every other model Maytronics lists motor units for. Each link opens that robot's own parts page at its motor units.
Every other model (44)
Refurbished and open-box editions use their base model's parts. Not listed? Find your model or send us the model number from the label under the handle.
When to replace a Dolphin motor unit.
How to replace and care for Dolphin motor units
- How do I replace the motor unit on my Dolphin?Click your robot model from the following list to see the video and instructions. M250 (Nautilus CC Plus) Tools Needed: Phillips screwdriver Phillips flathead…
- My impeller is clogged – How do I clean it?Make sure the power supply is unplugged from the outlet. If you notice debris trapped in the impeller, open the impeller, remove the debris, and reassemble it. (Caution…
- How do I clean the impeller on the EON 100/120d?Follow the steps to clean the impeller: Remove the filter from the robot. Connect the charger to the robot and plug it in. As a safety measure, take a screwdriver and…
- The impeller is clogged on my Liberty - How do I clean it?Caution! This robot is connected to a battery, and following the steps below are requested to be performed as written only! If your Liberty robot does not come with an…
Dolphin motor units, answered.
How do I know if my Dolphin motor unit is bad?
Clear the impeller and test the robot on a known-good power supply and cable first. If the pump hums without turning, the tracks no longer drive or there is water inside the sealed housing, the motor unit has failed. The troubleshooting guide for your model has the checks in order.
Is replacing a Dolphin motor unit worth it?
Often, yes: the motor unit is the heart of the robot and the rest of it (body, filter, tracks) has years left. Compare the unit's price against the robot's age and warranty, and talk to us before you decide; if the robot is under warranty the motor is covered.
What does EX mean on a Dolphin motor unit?
EX marks an exchange part: Maytronics expects the old motor unit back. The part page lists the price and the robots the unit fits; ask us about the exchange before ordering.


















