Troubleshooting · Troubleshooting

I can power my Liberty on, but it does not move

From Maytronics support, updated 2025-03-23, rewritten for clarity.

Read the fix
The fix

Step by step.

Try the following troubleshooting steps:

  1. Ensure that the charger is working correctly. Charge the robot for a full charging cycle, until the power unit LED shows 3 steady LEDs.

  2. Ensure the robot is fully submerged in the water for proper operation. Place the robot in the water within 30 seconds after starting it.

  3. Clean the filter cartridges.

How to clean the filters
  1. Check the tracks to see if any debris is stuck there.
How to clean the tracks

Make sure the robot is unplugged, turn the robot upside down, and check the tracks and brushes for any obstructions or visible damage.

  1. For the Liberty 300/400, verify that the Eco Mode is not set. To cancel Eco Mode, remove the robot from the pool and connect it to the charger.

After completing the troubleshooting steps, is it still not working? Contact Customer Care contact us.

Source: Maytronics support. Rewritten for clarity with the same steps; the videos and illustrations are Maytronics' own.

Still need help?

Talk to someone who knows Dolphins.

Talk to a Dolphin specialist Live chat about this question, a part number or a fix. Real people, no bots. Start a chat Find an authorized dealer 1,200+ Dolphin service dealers across the US for repairs, parts and warranty work. Find a dealer Warranty and repairs What the Maytronics warranty covers, how to register and how a repair claim works. Warranty details