Support · 32 answers · 15 fixes
Dolphin Liberty.
Liberty 200, 300, 400 and 600: charging, the Clicker, the app and what to do when it stops.
Liberty 200/300/400 / Troubleshooting
Troubleshooting (8)
- Eco Mode is not working on my Dolphin LibertyEco Mode is included with the Dolphin Liberty 200 (manufactured in 2024 onwards), 300 and 400. Make sure that the Eco Mode feature is activated correctly: Press the…
- I can power my Liberty on, but it does not moveTry the following troubleshooting steps: Ensure that the charger is working correctly. Charge the robot for a full charging cycle, until the power unit LED shows 3…
- Why can’t I access all of the features on my Liberty power unit?The Power Unit is the controller for the Liberty 200, 300, and 400 robotic cleaners. The Liberty 400 comes with the MyDolphinPlus app. Your Dolphin Liberty is programmed…
- The Clicker is not working with my cordless robotNote: The Clicker is for retrieving the Dolphin Liberty 300/400/600 at the end of a cycle. The Liberty 600 and EON™ 100/120d feature the Click-to-Stop feature, which…
- Cycle selector is not working on Dolphin Liberty 300 and 400Make sure that the Cycle Selector feature is activated correctly: Press the Power (ON) button. After the battery LED lights up, press and hold the Power (ON) button for…
- My Dolphin Liberty doesn't complete the cycle, with red LED on the power unitThe Liberty 200 & 300 manufactured from 2024 onwards, have a 120 minute cycle time. The Liberty 200 & 300 manufactured before 2024 have a 90 minute cycle time. Try the…
- My Liberty doesn't climb the wallsIf you notice that your Dolphin Liberty has difficulty climbing the walls, try the following troubleshooting steps: Check that the filters are not dirty or clogged…
- The impeller is clogged on my Liberty - How do I clean it?Caution! This robot is connected to a battery, and following the steps below are requested to be performed as written only! If your Liberty robot does not come with an…
Liberty 200/300/400 / Use & Maintenance
Use & Maintenance (10)
- What is the safest way to use my Dolphin Liberty induction charger?Remember to always charge the pool cleaner in a protected and shaded area at a temperature range of 43°F - 95°F, until you see 3 green bars in the battery indicator…
- How do I properly store my Liberty robot?To take the best care of your Liberty robot, these are our recommended storage steps after each cleaning cycle: Remove the Dolphin Liberty from the pool and clean the…
- What settings are available on my Liberty 300/400?Eco Mode (Included with Liberty 200 - manufactured in 2024 onwards, Liberty 300, 400) The Eco Mode is an automatic cleaning scheduler, which allows you to leave the…
- What is the Eco Mode and how do I set the Eco Mode?Eco Mode lets you keep the robot in the pool for up to a week before recharging. Incorporate Eco Mode into your pool routine for added convenience and ease of use…
- How do I remove my Dolphin Liberty from the pool?When the Liberty robot completes the cleaning cycle, the robot will stop next to the nearest wall, waiting to be picked up. For the Liberty 300 and Liberty 400, take the…
- Which filters come with my Dolphin Liberty?The Liberty 200 comes with a filter basket installed with Net + Ultra-Fine filters. The Liberty 300 and 400 come with a filter basket installed with Net + Ultra-Fine…
- What is the safest way to use my Dolphin Liberty?Your Liberty 200/300/400 comes with an inductive charger that has IP54 protection. The Liberty 600 comes with a conductive charger. To use your Liberty robot safely…
- Getting started with your LibertyCongratulations on your new Dolphin Liberty and welcome to the Dolphin family! After you’ve unpacked your new Liberty and removed all the plastic wrapping, it’s time to…
- What is the Cycle Selector and how do I set the Cycle Selector for my cordless Dolphin Liberty 300 and 400?Liberty 300 On the Liberty 300, the Cycle Selector option allows you to switch the cleaning mode from Regular (for floors, walls, and waterline) to Floor Only. Liberty…
- How do I use the Clicker with my cordless robot?Use the Clicker to stop or pick up the robot! Read more to understand the differences: Note: The Clicker is for retrieving the Dolphin Liberty 300/400/600 at the end of…
Liberty 600 / Troubleshooting
Troubleshooting (5)
- My Liberty 600 isn't reaching the stepsMake sure the robot isn't set on Floor Only mode. On Regular, Ultra-Clean, and the 1-week Eco Mode settings, the robot will ascend steps and sun ledges. We recommend…
- My Liberty 600 starts and then stops / Red LED on robotIf the robot starts the cycle and then stops before the cycle is complete, or there is a red LED on the robot interface, try the following troubleshooting steps: Ensure…
- My Liberty 600 has stopped workingIf the robot doesn't start working after pressing the power button or by initiating from the app, then try the following troubleshooting steps: Please ensure the robot…
- Why can't I pair my cordless robot with the Maytronics One app?The Maytronics One app is currently available for the EON 100, 120d, and Liberty 600 only. If you’re having trouble connecting your cordless robot to the Maytronics One…
- Why doesn't the Wi-Fi stay connected to the Maytronics One app?The robot does not stay connected to Wi-Fi or Bluetooth while operating in the water. After removing the robot from the water, if it was connected before, the connection…
Liberty 600 / Use & Maintenance
Use & Maintenance (9)
- How do the features on my Liberty 600 work?MaytronicsOne App The MaytronicsOne App lets you easily control your Dolphin Liberty 600—adjust cleaning modes, set the preferred homing wall, check battery status, and…
- How does the Liberty 600 charge?The Liberty 600 uses an innovative conductive charger specifically designed for quick, reliable recharging of its extended battery capacity. Make sure to charge the…
- What do the LEDs on my Liberty 600 mean?The Liberty 600 has an ambient LED on the front of the robot. This can be set through the MaytronicsOne app, on the home screen, under Visual Effects. The front LED is…
- Getting started with your Liberty 600Congratulations on your new Liberty 600 and welcome to the Dolphin family! Getting started is easy. Follow these simple steps: Connect the charger to the robot. Plug the…
- Why doesn't my cordless robot respond to the App while underwater?Our cordless models, the EON™ and Liberty 400/600, do not remain connected to Wi-Fi or Bluetooth while submerged and operating in the water. After removing the robot…
- How do I set the Eco Mode on my Liberty 600?You can activate Eco Mode either directly on the robot interface or through the MaytronicsOne App. Setting Eco Mode on the Robot Interface: Press the Mode Selector…
- What cleaning modes are available with my Liberty 600?The Liberty 600 high-capacity battery supports four cleaning modes, ensuring an optimal cleaning of most residential pools (up to 49ft): • Full Coverage – 3 hours…
- How do I connect to the Maytronics One App for the first time?The robot does not stay connected to Wi-Fi + Bluetooth while operating in the water. Use the Maytronics One App to pair with your Liberty 600, EON 100, or EON 120d to…
- How do I set or change the Homing Wall?It is crucial to have the robot complete 2-3 cleaning cycles before setting the Homing feature so that the robot can learn the pool! To begin, open the MaytronicsOne app…
No answers match. Try a different word, or ask us directly.
More support
Fixes by model, parts and manuals.
Troubleshooting by modelA problem-first guide for every Dolphin and Niya robot.
Replacement parts241 genuine parts with the robots each one fits.
Manuals and guidesUser manuals, quick-start guides and how-to videos.
Support hubEvery answer, every category.
Talk to a Dolphin specialist
Live chat about your robot, a part number or a fix. Real people, no bots.
Start a chat
Find an authorized dealer
1,200+ Dolphin service dealers across the US for repairs, parts and warranty work.
Find a dealer
Warranty and repairs
What the Maytronics warranty covers, how to register and how a repair claim works.
Warranty details