How do I set the Eco Mode on my Liberty 600?

You can activate Eco Mode either directly on the robot interface or through the MaytronicsOne App.

Setting Eco Mode on the Robot Interface:

1. Press the Mode Selector button (•••). The LED will light up next to the chosen mode.
2. The default setting is Regular Mode, which cleans the floor, walls, and waterline in three 60-minute sessions every 72 hours.
3. Continue pressing the button to switch to Floor Only or Eco Mode. Eco Mode runs three 1-hour cycles with 48-hour intervals between each cycle.

Additional cleaning modes and the 2-week Eco Mode can be configured through the app.

Setting Eco Mode via the MaytronicsOne App:

1. Open the MaytronicsOne App. Make sure the robot is not currently charging.
2. Click the arrow next to the cleaning mode and choose 'Eco' from the list.
3. Under the Eco tab, choose your preferred cycle configuration:

Half-week: 2 sessions (90 min each) every 72 hours.

One week: 3 sessions (60 min each) every 72 hours. (Default setting)

Two weeks: 6 sessions (40 min each) every 48 hours.

If the Homing feature is enabled, the robot will wait at the selected wall at the end of each cleaning cycle.

Using the Clicker in Eco Mode will cancel the upcoming scheduled cycles.