How do I charge the EON 100/120d?
What to know.
The EON™ 100/120d uses an IP54 conductive charger. Fully charge the battery before first use, and make sure to return the charging port cover to its place after charging to keep the charging area dry.
Here’s how the charging works:
Charging Time: Approximately 4.5 hours from low to full charge.
Charging Location: Always charge in a shaded area, not in the direct sun, ideally within a temperature range of 41°F–95°F. Exposing the charger or the robot to temperatures outside this range can decrease battery life and increase the risk of charging faults.
Battery LED Indicator: While charging, the battery indicator on the robot interface blinks green and advances through each charging level. Once fully charged, the light stays solid green.
| Charging Time | Charging Location | Battery LED Indicator |
|---|---|---|
| 4. 5 Hours | Shaded area (not in the direct sun) with a temperature range of 41°F–95°F | Charging- Blinking Green |
| Fully Charged – Solid Green |
Source: Maytronics support. Rewritten for clarity with the same steps; the videos and illustrations are Maytronics' own.
Parts that fix this.
This answer comes down to power supplies & chargers. The exact part depends on the model: choose your robot and we open its parts list, or browse the category for every model.
Browse by category:Power Supplies & Chargers All genuine Dolphin parts →
This answer on your robot.
Maytronics tags this answer for the 1 model below.