How do the features on the EON 100/120d work?
What to know.
MaytronicsOne App
The Maytronics One App lets you easily control your Dolphin EON 100/120d. You can choose the cleaning modes and scanning type, set your preferred parking wall, schedule weekly cleanings, check the filter level status, and water temperature, all while the robot is out of the water.
More about connecting to the MaytronicsOne app
UltraRun™ Mode
UltraRun™ is a cleaning scheduler that lets you keep your robot in the pool up to a week for the EON 100 and up to 2.5 weeks for the EON 120d before recharging. It’s easy to set: you can do it directly on the robot interface or through the MaytronicsOne app to tailor the scanning and cleaning modes to your specific pool requirements.
Steps Jet Cleaning
Our robot uses JETIQ™ technology and dual-drive brushes to climb and clean steps. This feature works in the Full, Ultra-Clean Coverage, and UltraRun™ cycles up to one week.
to read more about the steps and sun-ledge cleaning
Homing Wall
With the Homing feature, the EON 100/120d parks at your preferred wall after each cleaning cycle, including during UltraRun™ cycles. You can easily set or change the Homing Wall in the app!
Clicker
The EON 120d includes the Clicker to help pick up and remove the robot from the pool more easily! The EON 100 is compatible with the Clicker as an optional accessory if you’d like to add this feature.
Source: Maytronics support. Rewritten for clarity with the same steps; the videos and illustrations are Maytronics' own.
This answer on your robot.
Maytronics tags this answer for the 1 model below.