How to install the DebrisLock filter and configure the backwash?
What to know.
To upgrade the EON 100 filtration, you can purchase our patented DebrisLock™ (14 micron) filter, which uses backwash technology. It is compatible with EON™ 100, allowing you to benefit from our filtration technology.
To upgrade to the DebrisLock™ filter, you need to activate the backwash technology via the MaytronicsOne app.
- Navigate to Settings (three dots in the top-right corner), select Filter Type.
- Enable the backwash by toggling the Activate Backwash switch. It will turn blue when activated.
To switch to a non-DebrisLock™ filter, you need to deactivate the backwash technology via the MaytronicsOne app.
- Navigate to Settings (three dots in the top-right corner), select Filter Type.
- Disable the backwash by toggling the Activate Backwash switch. It should be gray.
- Click Change to Non-DebrisLock filter, then Confirm.
Source: Maytronics support. Rewritten for clarity with the same steps; the videos and illustrations are Maytronics' own.
Parts that fix this.
This answer comes down to filters. The exact part depends on the model: choose your robot and we open its parts list, or browse the category for every model.
Browse by category:Filters All genuine Dolphin parts →